pH Electrode Accessories
Chemglass Life Sciences BNC Female to Male Extension Cable, 4ft
BNC Female to Male Extension Cable, 4ftBNC extension cable for CG-1872-A series of electrode adapters. Adapter permits CG-1872 series pH electrode(12mm OD) to be inserted either directly into smaller reactors or down through a CG-1872-B baffle.
Chemglass Life Sciences Adapter to Connect VP Sensor Head to T-82 Cable
DO Probe VP Adapter. Cathode: Platinum Anode: Silver Polarization: ~675mV Output: 40 to 70nA in air at 25C Temperature: 0 to 60C; Sterilization to 130C Stability: 2% or Readout per week at constant pressure/temp 30C Linearity: Better than 0.3% of readout Pressure: 60PSI maximum Material: Wetted parts 316L SST O-Ring: Viton
Chemglass Life Sciences pH Probe, with VP, 12 x 120mm
pH probe with VP, 12x120mm. • pH Range: 0-12 • Electrodes are filled with gel reference electrolyte under a pressure of 2.5 bar • Pressure Range: From vacuum up to a process of maximum 36PSI (2.5 bar) • Temperature Range: Steam sterilization/autoclavable to 266°F (0 to 130°C) • In-situ sterilization: Up to 100 cycles under standard conditions • Fully autoclavable or in-situ sterializable
Chemglass Life Sciences DO Probe, w/VP, 12 x 120mm
DO Probe w/VP, 12x120mm. • Cathode: Platinum • Anode: Silver • Polarization: ~675mV • Output: 40 to 70nA in air at 25°C • Temperature: 0 to 60°C; Sterilization to 130°C • Stability: 2% or Readout per week at constant pressure/temp 30°C • Linearity: Better than ±0.3% of readout • Pressure: 60PSI maximum • Material: Wetted parts 316L SST • O-Ring: Viton
Chemglass Life Sciences pH Probe Cable K8 connection to BNC, 10'
pH Probe Cable K8 connection to BNC, 10'. Standard BNC connector to AK9 provides interface connection between pH probe and controller.
Sigma Aldrich Fine Chemicals Biosciences SYNLECTRO SS ELECTRODE 3X20X60
NC3364407 SYNLECTRO SS ELECTRODE 3X20X60
ELECTROCELL NORTH AMERICA INC SILVER CHLORIDE REF ELECTRODE
Silver/Silver chloride reference electrode, 2 mm OD, PEEK body
Chemglass Life Sciences pH Probe Cable K8 connection to BNC, 3'
pH Probe Cable K8 connection to BNC, 3'. Standard BNC connector to AK9 provides interface connection between pH probe and controller. For use with CLS-1438-002.